Checking the toner quantity and total count, Staple jam removal – Sharp AR-M257 User Manual

Page 102

Advertising
background image

76

TROUBLESHOOTING AND MAINTENANCE

STAPLE JAM REMOVAL

If staples become jammed in the stapler, the message "CHECK STAPLER POSITION OR STAPLE JAM." will appear.
Follow these steps to remove the jammed staples.

1

Open the stapler cover.

2

Grasp the green portion of the staple
box and remove the staple box from
the stapler.

3

Raise the lever at the end of the staple
box and remove the jammed staples.

4

Return the lever to its original
position.

5

Insert the staple box into the stapler
unit until it clicks into place.

6

Close the stapler cover.

CHECKING THE TONER QUANTITY
AND TOTAL COUNT

The approximate quantity of toner remaining and the total count can be displayed as explained below.

● The total count shows the combined output total of the copy, fax, and printer functions.

Checking the total count and toner quantity

Hold down the [COPY] key. The total count and toner quantity appear while the key is held down.

• Each 11" x 17" (A3) page is counted as two pages. Two sided pages are also counted as two pages.
• The amount of toner consumed will vary depending on conditions of usage and the type of originals copied.

The toner quantity display should only be used as an approximate guide.

COPY

PRINT

SPECIAL MODES

2-SIDED COPY

OUTPUT

TOTAL COUNT : 0,123,456

TONER QUANTITY : 100-75%

8½x11

8½x14

Note

!Andromeda_copy_sec.book 76 ページ 2006年11月23日 木曜日 午後6時1分

Advertising
This manual is related to the following products: