Sharp AR-M257 - Manual (Page 228)

4 PRINTING FROM MACINTOSH
52 C O N T E N T S
Stapling printed pages (when a finisher is installed)
(part 3)
Mac OS X
1
Select [Printer Features].
2
Select the "Binding Edge".
3
Select the staple function or the punch function.
For the staple function, select the number of staples in
the "Staple" menu.
For the punch function, click the [Punch] checkbox so
that a checkmark appears.
Mac OS 9
1
Select [Output/Document Style].
2
Select the staple function or the punch function.
If you are stapling, select the stapling pattern from the
"1-Sided Staple" menu or the "2-Sided Staple" menu.
After a pattern is selected, a print image showing the
binding edge will appear.
If you are punching, select the binding edge from the
"Punch" menu.
(1) (2) (3) (1) (2)
● In Mac OS X v10.1.5, the binding edge cannot be selected. If the paper is oriented vertically, the binding edge will be the left edge. If the paper is
oriented horizontally, the binding edge will be the bottom edge. Select the staple settings or punch settings on the [Output] tab of [Printer Features].
● In Mac OS X v10.2.8, select the settings in [Advanced].
Note