Sharp AR-M257 - Manual (Page 233)

5 OPERATION AT THE MACHINE
57 C O N T E N T S
Configuring the printer condition settings
(part 2)
4
Touch the desired setting on the setting screen
of the desired item and touch the [OK] key.
To set another item, repeat steps 3 and 4.
5
When finished, touch the [EXIT] key.
More information on the condition setting screen
When a checkbox ( ) appears in front of a setting, a checkmark ( ) will appear when the checkbox is touched.
This indicates that the setting is enabled. If a checkbox with a checkmark ( ) is touched, the checkmark is cleared ( ) and the
setting is disabled.
When a key that appears in the form
is touched, the setting screen of that key will appear.
If the settings continue on the following screen(s), touch the and keys to move back and forth through the screens. To
return to the category selection screen, touch the [OK] key.
The currently set numerical value is displayed.
Numerical values can be set by touching the
and keys.
OK
1/4
P
1
DEFAULT SETTINGS
TONER SAVE
COPIES
ORIENTATION
CONDITION SETTINGS
DEFAULT SETTINGS
EXIT
PostScript SETTINGS
PCL SETTINGS
OK
1/4
P
1
DEFAULT SETTINGS
TONER SAVE
COPIES
ORIENTATION
1 (1 999)
1
2
3
4 5
The following keys appear in screens that
require the entry of numerical values.
1
2 X X X
3
4
5