Sharp AR-M257 - Manual (Page 69)

43
CONVENIENT COPY FUNCTIONS
3
DUAL PAGE COPY
The dual page copy function produces separate copies of two adjoining pages on the document glass. It is
especially useful when copying books and other bound documents.
[Example] Copying the right and left pages of a book
1 Touch the [DUAL PAGE COPY] key in
the special modes screen.
The [DUAL PAGE
COPY] key is highlighted
to indicate that the
function is enabled, and
the dual page copy icon
(
) will appear in the
screen.
2 Touch the [OK] key in the special
modes screen.
You will return to the
main screen of copy
mode.
3 Place the originals on the document
glass. (p.22)
When copying book originals:
When copying a thick book, press down gently on the
book to flatten it against the document glass.
4 Make sure that 8-1/2" x 11" size paper
is selected.
If 8-1/2" x 11" size paper
is not selected, touch the
[PAPER SELECT] key to
select 8-1/2" x 11" paper.
5 Select the number of copies and any
other desired copy settings, and then
press the [START] key (
).
• A reduction setting can be selected when using
the dual page copy function, however, an
enlargement setting cannot be selected.
• The dual page copy function can only be used
when copying from the document glass. The
RSPF cannot be used.
• Only 8-1/2" x 11" paper can be used.
Book original Dual page copy
MULTI SHOT
1/2 DUAL PAGE
COPY
0
1/2
OK
DUAL PAGE
COPY
8 1 / 2 x11
Center line of
original
This page
is copied
first.
Index
• To cancel the dual page copy function,
touch the [DUAL PAGE COPY] key in the
special modes screen. (The key will no
longer be highlighted.) (See the screen of
step 1.)
• To erase shadows caused by the document
binding, use the edge erase function (p.42).
(Center Erase and Edge + Center Erase
cannot be used with the dual page copy
function.)
PAPER SELECT
AUTO 8½x11
100%
COPY RATIO
ACC.#-C
Note
!Andromeda_copy_sec.book 43 ページ ２００６年１１月２３日 木曜日 午後６時１分