Sangean DCR-200 - Manual (Page 35)

34
GB
Message function
The message function can record and playback with 2 sets of voice
message for 10 seconds each.
1. Press and hold the Message button to record the voice up to
10 seconds length. The LED is lighted during recording and the
display will show RECORD. Press and release the Message button
to pause the recording. After recording the LED will be flashing.
2. Press and release the Message button to playback the voice content,
and the display will show PLAYING. Press the message button to
pause the message while it is being playback, and the LED will dim.
3. To overwrite an existing message, press and hold the Message
button for 2 seconds to start recording a new message.
4. This Message button can operate in power on or off mode. In power
on mode the receiver even in DAB or FM as well as Aux-in will mute
during the voice message processing.
Note:
The Message button LED will be lighted during recording and
playing messages.
1-3