Sangean DCR-200 User Manual
Page 38
37
Information
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press and hold the Info button when the radio is in DAB or FM mode
to enter Advanced Information.
2. Rotate the Tuning button until the display shows “FACTORY”.
Press and release the Tuning control so that the display
shows “RESET”.
3. Press and release the Tuning control again to confirm the
reset operation. A full reset will be performed. The station list and
presets will be set to empty. Alarms will be cancelled and Egg timer
and sleep timer settings will be set to their default values.
The display will show “NO CLOCK” and after a few seconds a station
scan search will be performed automatically.
2,3
1