Samsung SV7000W - Manual (Page 15)

29
GB This function enables you to play back any pre-recorded cassette.
1 Switch on both the television and your VCR.
2 Select the television AV or AUX input.
3 Insert the video cassette to be played. If the safety tab on the
cassette is intact, press PLAY (
).
Otherwise, the cassette is played automatically.
➢
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
4 To: press:
stop the playback STOP ( ).
eject the cassette EJECT ( ).
0
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC P/STILL STOP
EJECT
RACKING SPEED AUDIO OUT
T
ER
CHANNEL
Playing a Cassette
3
4
4
Selecting the PLAY SYSTEM Mode
You can choose the PLAY SYSTEM if your system does not match
the SV-7000W VCR.
This function only needs to be used when there is no color or
picture during playback.
1 Press MENU on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding or buttons, until the cursor is placed
in front of the USER SET option.
3 Press the button to select this option.
Result: The USER SET1 menu is displayed.
4 Press the corresponding or buttons, until the cursor is placed
in front of the PLAY SYSTEM option.
5 Press or buttons until you select the appropriate system is
selected.
Case1 : NTSC or PAL-M Tape Playback
AUTO ➝ NTSC ➝ PAL-M
Case2 : PAL, SECAM, MESECAM Tape Playback
AUTO ➝ PAL ➝ SECAM ➝ MESECAM
6 On completion, press MENU twice to exit the menu.
☛
If you encounter a system error or the picture has no color
when in AUTO mode, select the play system manually.
28
You can cancel any programs that are:
◆ incorrect.
◆ no longer required.
1 Press the TIMER button and select STANDARD TIMER.
Result:
The preset programs are displayed.
2 Select the program to be cancelled by pressing the or
button.
3 Press the CLR/RST button to cancel the selected program.
Result:
All the recording information is deleted and the broad-
cast will not be recorded.
4 On completion, press MENU twice.
You can check your preset recordings:
◆ when you have finished presetting the VCR ; or
◆ if you have forgotten which programs will be recorded.
1 Press the TIMER button and select STANDARD TIMER.
Result:
The preset programs are displayed.
2 Press the or button to select the required program.
3 Press the button to select the CH.
4 Press the or button to select and change any values as
required.
5 On completion, press MENU twice.
Checking a Preset Recording
Cancelling a Preset Recording
REC.SPEED CLK/COUNT PICTURE TIMER
ART INPUT
2 3
5 6
STROBE AUDIO 1
7 8 9
0
CLR/RST 100
REW
PLAY
F.F
REC P/S STOP
3
CLOCK: 1/JAN WED 12:32P
CH DAY START → STOP
❿ 1 SU19 7:05P → 7:25P ❿❿
--- ---- --:-- → --:-- ❿❿
--- ---- --:-- → --:-- ❿❿
--- ---- --:-- → --:-- ❿❿
--- ---- --:-- → --:-- ❿❿
--- ---- --:-- → --:-- ❿❿
# ❷ SET: ❿
DELETE:(CLR/RST) (MENU)
CLOCK: 1/JAN WED 12:32P
CH DAY START → STOP
❿ 1 SU19 7:05P → 7:25P ❿❿
--- ---- --:-- → --:-- ❿❿
--- ---- --:-- → --:-- ❿❿
--- ---- --:-- → --:-- ❿❿
--- ---- --:-- → --:-- ❿❿
--- ---- --:-- → --:-- ❿❿
# ❷ SET: ❿
DELETE:(CLR/RST) (MENU)
** USER SET1 **
TAPE SELECT :E180/
T120
CLOCK TYPE :12H
❿ PLAY SYSTEM :AUTO
OSD :ON
USER SET2
# ❷ ❿ END:(MENU)
** M E N U **
TIMER PROGRAMMING
❿ USER SET
INSTALLATION
LANGUAGE SET
CLOCK SET
# ❷ ❿ END:(MENU)