Sim2 Multimedia Grand Cinema RTX 55TV - Manual (Page 17)

17
Automatic shut-down
The RTX 55TV is equipped with a safety feature ensuring that
in the absence of a television broadcast signal (for example late
at night when certain channels close down and ʻsnowʼ appears
on the screen), the internal circuits will switch automatically to
stand-by after about 15 minutes.
Switching off completely
To switch off the appliance completely (and isolate it from the
power supply, for example at the end of a dayʼs viewing), simply
press the main power switch [32] Fig.7.
Switching off power is not only advisable for reasons of safety.
It also has the advantage of saving electricity.
Note: In addition to the ways of switching off described above,
there is also the option of setting a timer to switch off the ap-
pliance automatically after a programmed delay. Details of how
to use this function are given further on in the manual.
ON SCREEN DISPLAY
Your RTX 55TV is equipped with an On Screen Display (OSD)
system that will generate a series of video pages on the screen,
superimposed on the television picture, containing menus and
sub-menus; these are organised so as to group together similar
functions (referred to as options), which you the user can se-
lect and set up as you want to suit your personal viewing and
listening preferences.
Before looking in detail at the individual options and settings
of each menu, this section provides a general overview of the
menus that will give an understanding of how they are structured
and what they do.
The procedures for displaying a menu on the screen
and performing the various steps of selecting options
and making settings are the same for all menus and
sub-menus.
Figures 8 and 9 show how to use the OSD quickly and ea-
sily from the remote control and the cabinet controls.
From here on, therefore, the individual steps involved
in accessing a given menu, selecting options and/or
setting values will not be repeated every time in the
directions.
Soun Ratiod Image
Main Set. Others
MENU Main Settings
Selection
Adjustment
Selection
TV Exit
AV Source
Mute Off
Aspect Ratio Back
TV Exit
TXT Videotext
Text Mix
Index page
Reveal text
Page enlarge
Page hold
Sub-page
Page cancel
Call-up pages
? Help
? Help
- +
i
?
x
Selecting the OSD language
Before reading further through this manual, select a preferred
language for the OSD, so that this can be used to display all the
relative messages, prompts and information on your screen.
This will ensure that you understand the information contained
in the functions, and help you to use it more efficiently.
To select the language, proceed as follows:
1) Display the Main Settings menu.
2) Select “Setup” and confirm: the Setup sub-menu appears
on the screen.
3) Select “Language” and choose the language in which you
want to display all OSD information.
The languages available are: “Italiano”, “English”, Français”,
“Deutsch” and “Español”.
Help
To remind yourself of the main operating buttons and their fun-
ctions, press button [17] on the remote control twice to display
the two Help pages, on which this information is represented
graphically. To exit the Help function, press the TV button [21]
on the remote control.
Fig.9
Fig.8