Sim2 Multimedia Grand Cinema RTX 55TV - Manual (Page 23)

23
• “DELETE” (in yellow)
This function can be used to remove an unwanted channel
from the table: in reality, the channel is simply moved to the
last programme number (99).To delete a channel, proceed
internally of the Overview menu as follows:
1) Scroll through the list of programmes and select the one
you want to delete.
2) Press the yellow button [4] on the remote control to delete
the selected channel.
Example: if the channel to be deleted is associated with
number 2, once removed, the channels stored under higher
numbers will all shift down by one. In other words, the channel
stored previously as programme number 3 becomes 2, the
previous number 4 becomes 3, and so on.
• “LOCK” (in blue)
This function allows you to prevent selected channels from
unauthorised viewing (by children, for example). The operation
of programming this function involves two distinct steps:
A) selection of the channel to be locked out;
B) switching the Lock on (or off)
To lock out a channel, proceed as follows:
A) Highlight the channel:
First of all, select the channel you want to lock against viewing.
Display the Overview sub-menu on th screen and proceed as
follows:
1) Scroll through the table of channels and select the one you
want to lock out.
2) Press button [3] on the remote control to mark its programme
number in blue. To deactivate the marker, select it and press
the blue button a second time.
Note:To mark other channels, repeat the entire procedure descri-
bed above. In any event, the entire procedure of step A can be
performed at any given moment, independently of step B.
B) Switching the Lock on:
Step A of this procedure only SELECTS the channels you intend
to lock out. It does not activate the Lock function.To render Lock
status for the channels selected in step A above fully active
(ON) or inactive (OFF), proceed as follows:
1) Press the TV button [21] to exit the Overview menu (if di-
splayed)
2) Press the yellow button [4] to display the Main Settings
menu.
3) Scroll through the menu to “Setup”.
4) Scroll through the menu to “Lock code”.
5) Using the number buttons [2] of the remote control, enter
a secret three-digit code.
CAUTION:You will need to enter this code again to
switch the lock OFF, so it is good policy to make a
note of the number by entering it in the space below,
since it will no longer be visible once the function
is activated. MY CODE (3 digits):
I . . . .I . . . .I . . . .I
6) Exit this menu and go to the “Other” menu
7) Scroll through the menu to “Lock”, and finally, using the
number buttons [2] of the remote control, enter your 3-digit
secret code. The “Off” caption disappears and, as the code
is entered, 3 asterisks “* * *” will appear in its place;having
entered the code, the caption “On” appears to confirm that
the Lock is activated.
C) Switching the Lock off:
Repeat steps -06- and -07- of the procedure described above,
entering the same 3-digit secret code that was used to activate
the function.
“Note”: When the Lock is ON, it not only disallows viewing of
the channels selected in the Overview menu but also prevents
access to the Setup sub-menu, which contains your secret code.
The Lock must be switched off as described above before this
sub-menu can be accessed again.