Sim2 Multimedia Grand Cinema RTX 55TV - Manual (Page 6)

6
2 IMPORTANT INFORMATION ON SAFETY
NOTES ON SAFETY
Read this manual and keep it safe
This manual contains important information on how to install
and operate the RTX 55TV. Before using the appliance, read
the safety notes and the directions, which must be observed
conscientiously. Keep this manual safe for future reference.
Entrust servicing and repairs to specialist technicians.
Have all repair work done by authorised service technicians
only. The involvement of a technician will be required if the
appliance has suffered damage of any kind, for example if the
power cable or the plug has been damaged, if liquids or solid
objects have spilled over or fallen onto the cabinet, or if the
appliance has been exposed to rain or damp, or dropped, or
is simply not working as it should.
Connect the appliance only to the type of power
supply indicated
Connect the RTX 55TV to a mains power supply rated 220V
±10%, 50/60 Hz and equipped with an earth system. The
power cable of the appliance is equipped with a three pin
plug incorporating the earth connection. Accordingly, make
sure that the power socket and the mains supply where the
appliance is to be installed are wired with earth connections,
so that this protection is not lost. If in doubt, consult a qualified
electrician. Take care to avoid overloading the power socket
and any extension leads.
Be careful with cables.
Arrange cables in such a way that they will not cause any
obstruction. Keep cables out of the reach of small children.
Install the RTX 55 TV as near as possible to the wall power
socket. Avoid stepping on power cables, make certain they
do not become tangled, and never jerk or tug; do not expose
them to sources of heat, and make certain they do not become
knotted or kinked, especially near to plugs and connectors or
to the point where they leave the RTX 55TV cabinet. If cables
become damaged in any way, contact your nearest Service
Centre. Do not plug in or switch on the appliance using a
defective cable.
Disconnecting the appliance from the power supply.
The appliance is isolated from the power supply by removing
the plug from the power socket. When installing the appliance,
make sure that the plug end of the cable and the mains power
socket are easily accessible. To disconnect the appliance from
the power supply, pull out the plug. Do not tug the cable.
Disconnect the RTX 55TV during thunderstorms or
when not in use.
To prevent lightning strikes near your home from damaging the
appliance, disconnect it from the power supply during thunder-
storms or whenever it is not going to be used for any length of
time.In these cases, it is advisable to remove the plug from the
power socket and disconnect the aerial cable as well (Fig. 2).
When switching off the appliance overnight,rather than leaving it
in standby, switch it off at the main power switch ([32] Fig. 7).
This symbol warns that there is a danger
of electric shock from touching certain live
parts inside the cabinet.
This symbol indicates the inclusion in the
manual of important instructions that must
be read before operating or maintaining the
appliance.
CAUTION! RISK OF ELECTROCUTION: DO NOT OPEN!
This symbol warns of the risk involved in removing the
rear cover. Whatever the reason, the rear cover must be
removed only by a qualified and authorised service te-
chnician. To reduce the risk of electrocution, disconnect
the power cable from the rear panel before removing the
rear cover of the appliance.