Sim2 Multimedia Grand Cinema RTX 55TV - Manual (Page 5)

5
The Display, of elegant and original design, generates images
utilizing the most recent DLP™ chip by Texas Instruments
(DMD™ panel with 1280x720 resolution featuring 12° techno-
logy), a proprietary sealed dustproof optical engine, a new six
segment colour wheel and a Fresnel lens of new conception. All
of which adds up to a system offering a video display of excellent
quality, with close attention given to the aspects of definition,
detail, colour and contrast.
The RTX 55TV system is able to accept and process a wide
range of video signals, thanks to a set of socket ports allowing
connection to the widest imaginable variety of sources, analog
and digital alike: DVD players, video recorders, satellite and
terrestrial receivers, computers, video game consoles, camcor-
ders, etc.
The image processing system of the RTX 55TV allows optimum
reproduction of a wide range of input signals, from interlaced
video to high definition and digital graphics.Interlaced video
signals are converted into progressive signals by the highly
acclaimed DCDi TM , technology, guaranteeing smooth, natural,
flicker-free images without annoying pixel block effects.
High resolution signals are reproduced faithfully and without loss
of information or picture detail thanks to the powerful acquisition
capacity of the system when handling video signals with high
pixel rates.
1 PRESENTATATION OF THE RTX 55TV
Different input signal resolutions can be adapted to match the
specified screen resolution without loss of image quality, thanks
to a generous selection of preset aspect ratios, some of which
are user definable.
All sound and picture adjustments can be made from the remote
control interacting with a simple menu-activated On Screen
Display (OSD); alternatively, adjustments can be made using
the panel controls on the front edge of the cabinet.
IMPORTANT: The appliance has been subjected to exhau-
stive operating tests by SIM2 to ensure maximum quality. It is
therefore possible that the life of the lamp initially may be no
more than 30 - 60 hours. Besides the usual checks, the Quality
Control department also runs additional statistical tests before
despatch. In this instance the packaging may show signs of
having been opened, and the hours operation of the lamp may
be higher than the value required under standard procedures.