Sony SRP-X500P - Manual (Page 17)

17
System Configurations and Speaker Connections
System Configurations and Speaker Connections
Sample configuration using the SRP-X500P factory-settings
In this configuration, the SRP-X500P can be used without having to change the settings with the supplied SRP-X500P
Manager software.
• The configuration above uses two WRU-806 UHF Synthesizer Tuner Units or two URX-M1 Tuner Units included in
the UWP-X1/X2.
• When an electric condenser microphone is connected to the MIC INPUT 3 or 4 connector, set the +48V ON/OFF switch
for the respective connector to ON.
3 #
3 #
3 #
3
# 3 #
VIDEO
OUT RGB OUT
LINE
OUT
PROJECTOR CONTROL RS-232C
INPUT
VIDEO OUT LINE OUT
LINE OUT LINE
IN
RGB OUT
LINE OUT
AN-820 UHF Antenna or the
supplied antenna
Wireless
microphone
Transmitter
Projector
Wireless microphone
Transmitter
Front
speaker
(L) Front
speaker
(R)
AN-820 UHF Antenna or the supplied
antenna
PC
Document
camera
VCR , DVD player,
etc. MD recorder
To power source
High-impedance
speakers
PC
Table-top
microphone, etc.
Programmable
remote
commander