Sony SRP-X500P - Manual (Page 31)

31
Specifications
Signal format
RGB/component
Level Video signal: 0.7 Vp-p
Sync signal: 1 to 5 V
Impedance Video signal: 75
Ω
Sync signal: 47 k
Ω
OUTPUT VIDEO
Connector shape
Phono jack
Signal format
Composite
Level 1 Vp-p
Impedance 75
Ω
Remote connectors
PROJECTOR CONTROL
RS-232C:
D-sub, 9-pin (male)
CONTROL S IN/OUT:
Mini jack
REMOTE
PARALLEL:
D-sub 25-pin (female)
Input pins: Make contact input
Logic: C-MOS LEVEL active L
Input pulse width: 100 msec or more
Output pins: Open collector output
Withstand voltage: +24 V or less
Maximum sink current: 40 mA
RS-232C: D-sub 9-pin (male)
Others
ANT IN a/b connectors
BNC-type, supplies +9 V DC
+48V power supply
Supplies power to MIC INPUT 1 to 4
connectors (XLR-type) (only when
+48V ON/OFF selector is set to ON)
General
Power requirement
Model for the U.S.A and Canada:
AC 120 V, 60 Hz
Model for other countries:
AC 230 V, 50/60 Hz
Power consumption
120 W
Peak inrush current (model for Europe)
(1)Power ON, current probe method:
6 A (240 V)
(2)Hot switching inrush current,
measured in accordance with
European standard EN55103-1: 5 A
(230 V)
Dimensions 482 Ч 132 Ч 357 mm (w/h/d) (19 Ч 5
1
/
4
Ч 14 inches) (excluding protrusions)
Mass Approx. 12 kg (26 lb. 3 oz.)
Operating temperature
0°C to 40°C (32°F to 104°F)
Storage temperature
–20°C to 60°C (–4°F to 140°F)
Supplied accessories
Power cord (1)
Foot (4)
CD-ROM (1)
Operating Instructions (1)
Antenna (2)
Optional accessories
AN-820 UHF Antenna
WRU-806 UHF Synthesizer Tuner Unit
UWP-X1/X2 Wireless Microphone
System
RM-AV3000 series Universal Remote
Commander
Design and specifications are subject to change without
notice.