Sony SRP-X500P - Manual (Page 8)

8
Precautions
Precautions
• The SRP-X500P must be used within a temperature
range of 0 ° C to 40 ° C (32°F to 104°F).
• Operating the SRP-X500P near electrical equipment
(motors, transformers, or dimmers) may cause it to be
affected by electromagnetic induction. Keep the SRP-
X500P as far from such equipment as possible.
• The presence of the lighting equipment may produce
electrical interference over a very wide frequency range.
Position the antennas and the wireless microphones to be
used with the SRP-X500P so that interference is
minimized.
• To avoid degradation of the signal-to-noise ratio, do not
use the SRP-X500P near sources of electrical noise or in
locations subject to vibration, such as the following:
− near electrical equipment, such as motors,
transformers or dimmers
− near air conditioning equipment or places subject to
direct air flow from an air conditioner
• Clean the surface and the connectors of the SRP-X500P
with a dry, soft cloth. Never use thinner, benzene,
alcohol or any other chemicals, since these may mar the
finish.