Sony PBD-V30 - Manual (Page 52)

52
Connecting to a digital component such as an
amplifier with a digital input connector, DAT,
or MD
Connect the component via the PCM/DOLBY
DIGITAL connector using an optical digital cable (not
supplied).
When you play a DVD VIDEO, set “DIGITAL OUT”
in “INITIAL SETUP” to “D-PCM” (page 56).
Insert the plug firmly.
Notes
• Refer to the
instructions supplied
with the component
to be connected.
• You cannot make
direct digital audio
recordings of discs
recorded in Dolby
Digital (AC-3) format
using an MD deck or
DAT deck.
Note on digital recording
This player can be
connected to an optional
MD unit. Before making a
digital recording, be sure
that “CD” appears in the
front panel display after
turning this player on or
closing the disc cover.
Otherwise, the track
numbers may not be
recorded correctly.
Optical digital cable
(not supplied)
Amplifier with a digital
connector, MD deck, DAT
deck, etc.
DVD player
When you make the connections above, do not set
“DIGITAL OUT” in “INITIAL SETUP” to “DOLBY
DIGITAL.” If you do, a loud noise will suddenly come out
from the speakers, that is distressing to your ears or cause
the speakers to be damaged.
DIGITAL IN
OPTICAL
DIGITAL OUT (OPTICAL)
PCM/
DOLBY DIGITAL