Sony SPP-A968 - Manual (Page 17)

Basics
Basics
17 US
Basics
Making calls
Additional tasks
Notes
• If the handset beeps every second during conversation and “OUT OF
RANGE” appears on the display, move closer to the base unit; otherwise, the
call will be disconnected after one minute.
• When you increase the sound volume, in some cases the background noise
may be increased as well. You should adjust the volume accordingly.
To Do this
Adjust the handset volume During phone conversations, press
(VOL/PGM). Each press of (VOL/PGM)
switches the speaker volume by four levels.
Switch to tone dialing temporarily Press (*TONE) after you are connected.
The line will remain in tone dialing until
disconnected.
1
Pick up the handset from the
base unit.
2
Press (TALK) and wait until
“TALK” appears on the display.
The IN USE lamp on the base
unit lights up.
You then hear a dial tone. If you
hear five short error beeps and
“OUT OF RANGE” appears on
the display, move closer to the
base unit.
3
Dial the phone number.
During a conversation, you can
adjust the handset volume.
Follow the procedure described
in the following table.
4
When you’re done talking, press
(OFF) or replace the handset on
the base unit.
The display goes off.
(REDIAL)
(*TONE)
(VOL/PGM)
continued