Samsung SSA-S2000 - Manual (Page 14)

14_ Installation and External Connection
installation and external connection
EXTERNAL READER CONNECTION
- Proximity Reader Connection
Connect the DC 12V(+) of the power supply unit to the plus (+) line of the reader.
Connect the GND(-) line of the power supply unit to the minus (-) line of the reader.
Connect the Wiegand data input line 0 of the proximity reader to the purple line.
Connect the Wiegand data input line 1 of the proximity reader to the sky blue line.
For a list of compliant readers (external readers), see the followings:
- Standard 26bit Wiegand format proximity reader
1.
2.
3.
4.
•
X Y Z
[ \ ]
^ _ `
lzj lu{ W
iŒ““
zzhTzYWWW
Wiegand DATA0(Pink)
Wiegand DATA0(Sky blue)