Other information, Initial values – Samsung SSA-S2000 User Manual

Page 42

Advertising
background image

42_

Additional Features

other information

INITIAL VALUES

This product operates in the following initial values:
For changing the settings or registering/deleting the user card, refer to the applicable section in this document.

Entry permitted for a registered card

- The door control relay operates for 3 seconds.

- The green LED indicator fl ashes for 3 seconds.

Entry denied for an unregistered card

- The alarm relay operates for 2 seconds.

- The red LED indicator fl ashes for 2 seconds.

Duress Mode Password : 00
The TTL output port produces a signal for 3 seconds in Duress mode.

QUICK MODE : Disabled

Chime Bell Output : Enabled
Chime Bell Operating Time : 0.5 second

Melody Sound : Enabled

Keypad Input Limited Use : 20 seconds

When an input signal is sensed : ‘H’ € ‘L’ (common for all inputs)

When a TTL output signal is sensed : ‘H -> L’

Patrol Mode Delay Time : 00 minute

Door Sensor Sensing Time : 00 second

Retry count for an unauthenticated entry : 05 times

Alarm for Dismantled Device : Disabled
Dismantled device Alarm Output Port : 02 (Alarm Relay)

Toggle Mode : Disabled

Control Lock by the Door Sensor : Disabled

1)

2)

3)

4)

5)

6)

7)

8)

9)

10)

11)

12)

13)

14)

15)

Advertising
This manual is related to the following products: