Wiegand output setup, Initialization – Samsung SSA-S2000 User Manual

Page 16

Advertising
background image

16_

Initialization

initialization

WIEGAND OUTPUT SETUP

You can transfer data of the card read by SSA-S2000 in the 26-bit Wiegand output format.

Enabling this function will disable the TTL output and the chime bell sound.

To enable the 26-bit Wiegand output, you must manipulate the switch panel (SW1 and SW2) on the rear of the
product.

See the table below to make adjustment as needed.

Changing Output

SW1 #1

SW1 #2

SW2 #1

SW2 #2

Orange line with white stripes

Brown line with white stripes

ON

OFF

ON

OFF

TTL Output

Chime Bell Output

OFF

ON

OFF

ON

Wiegand Data0

Wiegand Data1

In the 26-bit Wiegand output mode, you can not initialize the product by short-circuiting cables.

INITIALIZATION

If you have the Master Card registered, you can use it to initialize the device.

Present the Master Card to the device.

Press the

9

button twice and press

ENT

.

The system will restore the factory default settings with all LED indicators
blinking.

Initializing the system will lose all data.

If the product works abnormally, use initialization to restore the default settings.

1.

2.

J

1.

2.

3.

M


X

Y

Z

[

\

]

^

_

`

lzj

lu{

W

iŒ““

zzhTzYWWW

tˆš›Œ™Gjˆ™‹

X

Y

Z

[

\

]

^

_

`

lzj

lu{

W

iŒ““

zzhTzYWWW

Advertising
This manual is related to the following products: