SMC Networks ROBO Cylinder RGD4D - Manual (Page 22)

12
5. Transporting and Handling
5.1 Handling the Actuator
5.1.1 Handling the Packed Unit
Unless otherwise specified, each actuator (axis) is shipped individually.
Please take care that the shipping box is not dropped or subjected to strong impact during transport.
•
The operator should not carry heavy shipping boxes by themselves.
• If the shipping box is left standing, it should be in a horizontal position.
• Do not climb on top of the shipping box.
• Do not place heavy objects on top of the shipping box.
5.1.2 Handling the Actuator After It is Unpacked
Lift the actuator up by the base to remove it from the packing.
•
When transporting the actuator, be careful not to hit it against nearby structures or object. In particular,
exercise caution to protect the motor unit and pulley case against impact.
• Do not exert excessive force on any part of the actuator.
• Be careful not to cause the cables to receive a tensile force.
Supplement) Please
refer to Section 4 above for the names of the actuator parts.