SMC Networks ROBO Cylinder RGD4D - Manual (Page 7)

Cable
Cable bearer
Power line
Signal lines (flat cable)
Duct
7.
Notes on using cable bearers
z Do not let the cable get tangled or kinked in a cable bearer or flexible tube. When bundling the cable,
keep a certain degree of flexibility (so that the cable will not become too taut when bent).
z Do not cause the cables to occupy more than
60% of the space in the cable bearer.
z Do not lay signal lines together with circuit lines
that create a strong electric field.
z The supplied cables are not robot cables. Accordingly,
never store the cables in a cable bearer.
z Always use a robot cable
for each relay cable. Bending radius (r)
z Use a cable bearer with a bending
radius (r) of 50 mm or greater.