SMC Networks ROBO Cylinder RGD4D - Manual (Page 36)

26
(11) Using feet
Applicable models: RA5, RA5R, RA7 (excluding flat types)
[1] On the RA7 type, attach feet using the tapped
mounting holes at the back.
[2] On the RA5 type, attach feet using square nuts
inserted into the T-grooves.
(12) Using tapped holes on the reference surface
Applicable models: RA5, RA5R, RA7 (excluding flat types and guide types)
Type Tapped hole diameter Effective thread depth
RA5 / RA5R M6 12 mm
RA7 M5 15 mm
Install the feet to the frame using bolts.
Foot Foot