Symbol Technologies LS 1000 - Manual (Page 55)

4-21
LS 1000 Product Reference Guide: Chapter 4, Programming the LS 1004
Interleaved 2 of 5
Enable/Disable Code I 2 of 5
Fixed Lengths for Code I 2 of 5
Select one or two lengths for the Interleaved 2 of 5 codes. If you set both Length 1 and
Length 2 to 0, the scanner can read any length within 36 characters. It is recommended
that you set the I 2 of 5 modulus 10 check to enabled when you set both Length 1 and
Length 2 to 0.
If any default setting is in effect and is an appropriate length, it need not be reset.
Length 1 may range from 00-36 and Length 2 may range from 00-36.
Enable Code I 2 of 5 Disable Code I 2 of 5
I 2 of 5 Length 1
(RANGE00-36)
I 2 OF 5 Length 2
(RANGE 00-36)
coverBook Page 21 Monday, December 1, 1997 2:19 PM