Symbol Technologies LS 1000 - Manual (Page 63)

4-29
LS 1000 Product Reference Guide: Chapter 4, Programming the LS 1004
Suffix
• Select one or two end-of-text characters to be added to transmitted data.
• None
• CR (Carriage Return) - Returns the cursor to the same position on the line after
each decode.
• LF (Line Feed) - Moves the cursor down a line after each decode.
• CR & LF - Allow you to select where the cursor on a display terminal returns to
after it displays each decoded symbol. Selecting both CR and LF returns the
cursor to the same position on successive lines after each decode. If you select no
control code, the cursor remains where it stopped after the last transmission.
• HT (Horizontal Tab) - Moves the cursor one tab space.
• End -of-text <ETX> - One or two characters, user-defined. Refer to the ASCII
Character table in Appendix A for more information.
Suffix None
Suffix CR
Suffix LF
User’s Choice Suf-
fix Character 1
Suffix ETX
Suffix CR/LF
Suffix HT
User’s Choice Suffix
Character 2
coverBook Page 29 Monday, December 1, 1997 2:19 PM