Operation continued, Product application information – Sunfire X Series User Manual

Page 10

Advertising
background image

Part # 4523343 Rev 1 (02/12/08)

Page 10

OPERATION continued

Griddle/Broiler

(Models X60-6R24RR, X60-6R24SS, X60-6R24RS,

See griddle seasoning before use .

Before turning on main gas supply, be sure all burner valves

are in the “OFF” position .

1 . Eight (8) ceramic bricks are supplied with each range .

These ceramics are to be placed in the burner section of

the griddle / broiler before it is put into operation .

2 . Each burner has a flange on each side which will serve

as a rest for a pair of ceramics . Position two ceramics

between each pair of burners with the projections facing

downward . Place two ceramics between the outside

burner on each side, using the side lining ledges as the

outer support .

3 . Light the pilots located in the broiler section .

4 . Turn the burner valves completely on . Burners should

exhibit a 5/16-inch stable blue flame .

NOTE: If burners need adjustment contact an authorized

licensed gas technician .

Range Shut down

1 . Turn all valves to the “OFF” position .

2 . If the unit is to be shut down for an extended period of

time, close the in-line gas valve .

PRODUCT APPLICATION INFORMATION

General

The range is the workhorse of the kitchen because of its

versatility . Most frequently used in small applications, such as

cafes, schools, church kitchens, firehouses, and small nursing

homes where demands are less taxing . As a general rule of

thumb, one four to six burner range with a hot top will be

adequate for a restaurant seating 30 to 35 .

The top of the range is designed for flexibility and the

preparation of numerous different types of products . It may

be equipped with two, or even three different types of tops

and burners, depending on the menu needs . An operation

that cooks to order, or uses the range primarily as back-up

will find that open burners will suit most of their needs .

Preparation of soups, stocks, or sauces is done on a hot top

where slow, even cooking is desirable .

Heating larger quantities of food can be done more

efficiently than heating small quantities . Pots and pans

should be covered whenever possible to reduce energy

consumption .

High acid sauces, such as tomato should be cooked in

stainless steel rather than aluminum to avoid chemical

reaction . Light colored sauces such as Alfredo may be

discolored by the use of aluminum, especially if stirred with

a metal spoon or whip . Saltwater shellfish may pit aluminum

pots if they are frequently used for this purpose .

NOTE: Many parts of the commercial range are raw steel . Hot

tops, griddles, springs, door hooks etc ., can react with the

moisture forming rust . This occurrence is normal and not

considered a defect . Clean with a stainless steel or fiber pad .

A light coating of cooking oil may be applied .

Open Burners

The most traditional uses of open burners are sautéing, pan

frying, and small stock pot work . Short-term cooking is the

most efficient use for the open burner . Pans should cover

as much of the grate as possible to minimize heat loss . The

maximum stock pot size to be used on an open burner is 12

inches, (305 mm), diameter . Open burners should be turned

off when not in use to conserve energy . Leaving a flame

burning is of no advantage since the heat is instantaneous .

Advertising