Sony Ericsson DFP-D3000 - Manual (Page 62)

9-28 DFP-3000
For this connection, open the Preset Configuration screen of the DFP-D3000 setup software, and set the
Primary Fallback setting to “NR2” in the preset corresponding to the AUX1 input. (Check the enclosed
part of the screen.)
Preset Configuration Screen (When AUX1 is selected)
If fallback must be performed in the order of AUX1 input and Analog input from SDDS, set the Primary
Fallback setting to “AUX1” in the preset corresponding to the SDDS. (Check the enclosed part of the
screen.)
Preset Configuration Screen (When SDDS is selected)