Sony Ericsson DFP-D3000 - Manual (Page 70)

9-36 DFP-3000
9.7.5 Audio Connecting the DTS-6, DTS-6D and DFP-D3000
For details of the connection, refer to the following table.
DFP-D3000 AUX Input 1/2 DTS-6 Adaptor to JM21 DTS-6D Analog out
(DB25, F/Cable M) “TS6 to CP500” (DB25 M/Cable F)
1 Left Ground N.C. N.C.
2 Left Hot 14 Left 14 Left
3 Left Center Cold N.A. N.A.
4 Center Ground N.C. N.C.
5 Center Hot 20 Center 20 Center
6 Right Center Cold N.A. N.A.
7 Right Ground N.C. N.C.
8 Right Hot 17 Right 17 Right
9 Left Surround Ground N.C. N.C.
10 Left Surround Cold 4 Audio Return 4 Audio Return
11 Right Surround Cold 3 Audio Return 3 Audio Return
12 Sub Woofer Cold 12 Audio Return 12 Audio Return
13 Sub Woofer Ground N.C. N.C.
14 Left Cold 1 Audio Return 1 Audio Return
15 Left Center Ground N.A. N.A.
16 Left Center Hot N.A. N.A.
17 Center Cold 8 Audio Return 8 Audio Return
18 Right Center Ground N.A. N.A.
19 Right Center Hot N.A. N.A.
20 Right Cold 5 Audio Return 5 Audio Return
21 N.C. N.C. N.C.
22 Right Surround Ground N.C. N.C.
23 Left Surround Hot 15 Left Surround Out 15 Left Surround Out
24 Right Surround Hot 2 Right Surround Out 2 Right Surround Out
25 Sub Woofer Hot 24 Sub Woofer Out 24 Sub Woofer Out
N.A.: No corresponding function. N.C.: Not connected.
m
1.
All audio grounds must be connected to the shield side of each twisted pair cables at the DFP-D3000.
2. The DTS-6 audio outputs must be connected using the “DTS6 to CP500 adaptor” provided by the
DTS dealer.