Samsung DVD-HR738/ - Manual (Page 42)

42 - English
S
ystem Setup
■ When the HDMI cable is connected, this
screen is not displayed. (HR738 Only)
■ If the P.SCAN button on the HDD & DVD
RECORDER’s front panel is pressed
during playback, the message “This
function is possible only on stop mode”
appears on the screen.
■ Progressive setting is only available when
the HDD & DVD RECORDER is in stop
mode.
NOTE
1 With the unit in Stop mode, press the P.SCAN button
on the front of the HDD & DVD RECORDER.
The message “Press [Yes] to confirm Progressive
scan mode. Otherwise, press [No].” will appear.
Press the
œ √ buttons to select Yes, and then
press the OK button.
2 The message “Please, set your TV to Progressive
input. To deactivate, press [STOP] key.” will
appear. Press the OK button.
3 The message “Video Output Mode Progressive
Scan” will appear.
The video will now be Progressive Scan.
Press [Yes] to confirm Progressive scan mode.
Otherwise, press [No].
Yes No
Please, set your TV to Progressive input.
To deactivate, press [STOP] key.
OK
Video Output Mode
Progressive Scan.
Canceling the
Progressive scan
1 With the unit in Stop mode, press the P.SCAN button
on the front of the HDD & DVD RECORDER.
The message “Press [Yes] to confirm Interlace
scan mode. Otherwise, press [No].” will appear.
Press the
œ √ buttons to select Yes, and then
press the OK button.
2 The message “Please, set your TV to Interlace
input. To deactivate, press [STOP] key.” will
appear. Press the OK button.
3 The message “Video Output Mode Interlace Scan”
will appear.
Press [Yes] to confirm Interlace scan mode.
Otherwise, press [No]
Yes No
Please, set your TV to Interlace input.
To deactivate, press [STOP] key.
OK
Video Output Mode
Interlace Scan.
HR733-HR738_XEU_01~58 6/23/06 10:18 AM Page 42