Samsung DVD-HR738/ - Manual (Page 80)

R
ecording
80 - English
Copying from a Camcorder
1 Connect the DV output jack of your camcorder to the
DV input jack on the front of your HDD & DVD
RECORDER using a DV cable.
2 Press the HDD or DVD button.
If you select DVD, press the OPEN/CLOSE button and
place a recordable disc on the disc tray. Press the
OPEN/CLOSE button to close the disc tray. Wait until
LOAD disappears from the front panel display.
3 Press the REC MODE button repeatedly to select
the recording speed(quality).
➞ SP ➞ LP ➞ EP ➞ XP
You may control the Camcorder using the IEEE1394 (DV)
interface.
4 Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that
enables camcorder control appears on the top of the
screen.
5 Select the Play ( √ ) icon on the upper part of the
screen to playback the camcorder and find the
starting position to copy.
6 To start recording, use the œ √ buttons to select
Record ( ● ) icon in the top side of the screen, then
press the OK button.
You can press the REC button of the remote control
to start recording.
- To stop recording -
Press the STOP ( ) button to stop or finish a
recording in progress.
• When using DVD-RW/-R discs, the message
“Updating the information of disc. Please wait for
a moment” is displayed.
Record Mode SP(35:12)
■ To display playback related icons on the
screen, press any direction button on the
remote control.
NOTE
DV
MOVE RETURN
The DV device is connected
HR733-HR738_XEU_59~88 6/23/06 10:28 AM Page 80