Samsung SWL-2200C - Manual (Page 12)

12
2. Before the Installation
The following section will assist you in installing your WLAN Adapter successfully. You
will install the MagicLAN Card and software (driver & utility), and finally set the network
properties to accommodate resource sharing and select the type of wireless network that
you wish to install. The MagicLAN can easily be installed and used, without bothering to
connect cables for keeping your computer to use network resources, as in case of a wired
LAN.
2.1 What is in Your Package?
Please check the contents of the box to make sure everything is included and ready for use.
Here is the list of what you should have in your package:
•
SWL-2200C(CF Card)
• Samsung MagicLAN Installation CD
2.2 System Requirement
• Operating System: Windows 95(OSR2), Windows 98SE(98), Windows ME, Windows
NT 4.0, Windows 2000, Windows XP, Windows CE, Linux
• Computer with a CD-ROM drive.
• Computer that have a
PCMCIA slot or Compact Flash interface , extra IRQs and I/O
address.
2.3 Preparations For Installation
◇ You have to prepare Installation CD which is provided by manufacturer.
◇ You can just install SWL-2200C cards to use Ad-hoc network.
◇ You need to install Access Poing(AP) to use Infrastructure network.(Refer to the AP
Manual about the installation method of AP)
◇ You may need the original CD of (Windows 95(OSR2), Windows 98SE(98),Windows
ME, Windows NT 4.0, Windows 2000, Windows XP) to set network environment.