Samsung SWL-2200C - Manual (Page 26)

26
3.4 Installation Procedure of Windows NT4.0
Please follow the following steps one by one to install the CF Card successfully.
There are two cases: when there is no Windows NT networking Installed and the other
when the Windows NT networking is already installed.
1. Insert SAMSUNG 11Mbps WLAN PC Card into the PCMCIA slot and power on
your computer.
2. Restart your computer and follow the below procedures.
Notice that there’s some difference between When Windows NT networking is not
installed and When Windows NT networking is already installed
<CASE1> When Windows NT networking is not installed:
1. Since there is no Windows NT networking installed yet, you should install your
driver manually. To do so, click on Start in task bar, go to Settings and then to
Control Panel.
2. Under Control Panel, double click on Network icon.
3. Since there is no Windows NT networking installed yet, you maybe asked if you
want to install NT networking first. Click on Yes and then Network Setup Wizard
will be start. Select ‘Wired to the network’ and click on ‘Next’. In ‘network setup
wizard’ box, click on ‘Select from list button’.