Samsung SWL-2200C - Manual (Page 61)

61
key0 Specifies one of 4 possible keys for the Data encryption.
One of these keys, identified by keyid,is used for the enciphering of Data
that is transmitted by this station.
All keys specified can be used for the deciphering of Data that is received.
The key value can be an ASCII character string or a hexadecimal value.
In case of 40 bit WEP,the length of the key value can be 5 characters or
10 hexadecimal digits and in cse of 104(128) bit WEP,the length of the
key value can be 13 characters or 26 hexadecimal digits.
The keys defined in the station must match the keys defined in the access
points; both on value and number (0 through 3).
Numbers are considered integers. (ie. key0=1234567890,or
key0=12345abcde,or key0=1234567890abcd12345678a4d3)
key1 Same as key0.
key2 Same as key0.
key3 Same as key0.
channel
Channel (frequency) for ad-hoc networks.
4 = default
Useless if using an access point.
valid range: 1-14 (depends on local restrictions)
threshold Medium reservation (RTS/CTS frame length)
Sets the number of octets in a message or fragment
above which a RTS/CTS handshake is performed.
500 = hidden stations
2347 = no RTS/CTS (default)
valid range: 0-2347
fragthresh Defines the number of bytes used for the fragmentation boundary for
directed
messages.
2346 = default
range: 256-2346 (even numbers only!)
mtu Maximum transfer unit
1500 = default
valid range: 256-2296
pc_debug Selects the PCMCIA debugging level.
0 .. 5
5. WIRELESS EXTENSION