Smart Technologies Smart Board V280 - Manual (Page 17)

7 | INTRODUCING YOUR SMART BOARD V280 INTERACTIVE WHITEBOARD
Standard Replaceable Parts
Contact your authorized SMART reseller to purchase any of the following items.
SMART High-Speed USB 2.0 Cable
An included 16' (5 m) high-speed USB 2.0 cable provides power to your
SMART Board interactive whiteboard from your Windows® computer.
Pens
Two LEDs embedded in the tip of each battery-powered pen enable your interactive
whiteboard’s cameras to track the pen tip as it moves across the screen surface.
SMART Board Interactive Whiteboard Wall-Mounting Kit
A 32" (81.3 cm) wall-mounting bracket comes with five screws and drywall anchors,
enabling you to wall-mount your interactive whiteboard simply and securely.
Pen Nibs and Tips
Your interactive whiteboard comes with four replacement pen nibs and tips.
NOTE
You can also replace the detachable valance and the USB hub. Additionally, you
can replace your interactive whiteboard’s cameras without special tools. Contact
your
authorized SMART reseller to order these field replaceable units.
Other Accessories
Contact your authorized SMART reseller to order any of the following accessory parts.
Floor Stand
You can also mount your SMART Board V280 interactive whiteboard on a
height-adjustable floor stand. To learn more about the FSV280 floor stand,
see Appendix C on page 67.
USB Extender Cables
If you wish to extend the length of the included 16' (5 m) USB cable between your
interactive whiteboard and your computer, the SMART Active USB Extension Cable
can increase this distance by an extra 16' (5 m) to a maximum of 32' (10 m).
See Appendix B on page 65 for more information.