Smart Technologies Smart Board V280 User Manual
Page 6
iv
|
IMPORTANT INFORMATION
•
Connect an external power supply (not included) to your SMART Board V280
interactive whiteboard when using a bus powered hub, such as the SMART Active
USB Extension Cable, with your product. The external power supply
(when required) must meet the Limited Power Source (LPS) requirements
of CSA/UL/IEC/EN 60950-1.
•
Before your clean your interactive whiteboard, shut down or disconnect
the connected computer.
•
If your SMART Board interactive whiteboard requires replacement parts,
make sure that the service technician uses replacement parts specified by
SMART Technologies.
•
Be aware that Kensington® locks aren't designed to be a solid protection measure
because the lock can be torn out. However, potential thieves might be reluctant
to try to sell a product with a broken Kensington lock hole, which would readily
identify it as a stolen item.