Samsung SCC-ZM395N - Manual (Page 16)

Version 1.1
- 16 -
- WDR : If you set <BACKLIGHT> to <WDR>, you will see
a menu where you can set the WDR options. specify the
shutter speed in WDR LEVEL, and the composition level in
<WEIGHT>. Select OUTDOOR, or INDOOR in <WHITE
BAL>. The WDR feature provides an extension of the gain
range, which is useful, especially if you work on pictures
both indoors and outdoors from inside of a building.
Namely, it improves the sharpness of the picture in outdoor
scenery as well as indoor.
◇ MANUAL
Adjust the iris level manually.
The overall brightness target of a camera will be set to ALC
level 0, while the iris can be adjusted manually.
● AGC(Auto Gain Control) / MOTION
With AGC active, if the signal strength falls below the
standard level, AGC will amplify the video signal to
automatically improve the sensitivity.
If <SENS-UP> is set to <OFF> or <FIX> mode, the
<MOTION> menu will switch to <AGC>.
With the USER ( ) submenu selected, press [ENTER] to
display the corresponding screen. In this mode, you can select
from VERY LOW to VERY HIGH in 16 levels, enabling deeper,
wider choices to your convenience. With the FIX ( ) submenu
selected, press [ENTER] to display the corresponding screen.
In this mode, you can select an individualized mode in 16
levels, regardless of the brightness.
※ As long as the DAY/NIGHT menu is set to AUTO in
Camera Setup, the AGC menu is not available.
※ As long as FLICKERLESS is set to ON, the AGC mode
is not available.
※ If you set BACKLIGHT to WDR, the AGC fix mode is not
available.
※ If the DAY/NIGHT menu of the CAMERA SET is set to
AUTO, the AGC menu will be deactivated.
※ If FLICKERLESS is set to ON, the AGC FIX mode will
be disabled.
You can specify a level of AGC for controlling the camera motion. This is available only of
the SENSE UP menu is set to AUTO. Select F.FAST if you want to monitor a very fast
moving object in a low contrast scene, and S.SLOW if monitoring a very slow moving,
inanimate object in the same condition.
※ As long as DAY/NIGHT is set to <AUTO>, the <MOTION> menu is not available.