Samsung SCC-ZM395N - Manual (Page 19)

Version 1.1
- 19 -
According to the specified recording mode, select a <WHITE BAL> mode with
necessary options.
- ATW1,2 : The camera can automatically adjust the color temperature in real time,
according to the ambient conditions.
(Color temperature range ATW1: 2500K ~ 9500K, ATW2 : 2000K ~ 10000K)
- AWC : Pressing [ENTER] on a desired item will perform ATW once.
※ You can set the R-GAIN/B-GAIN value.
- 3200K : Set the color temperature to 3200K.
- 5600K : Set the color temperature to 5600K.
- RED : Adjust the strength of the red color.
- BLUE : Adjust the strength of the blue color.
- R-GAIN/B-GAIN : Specify the current color temperature manually. (only in AWC state)
- BRIGHTNESS : Specify a brightness level switching from DAY mode to NIGHT mode set.
● FOCUS MODE
You can select a focus mode according to the angle that
you adjusted for camera recording.
- AF : This will monitor the screen continuously to focus
automatically. If you adjust the focus manually, that will
operate the same as in <MF>. This will also restore
focus after the operation of zoom.
- ONEAF : Restores focus after the operation of zoom,
and operates the same as in <MF> unless the operation
of zoom is executed.
- MF : You can adjust the focus manually.
※ While you are working on the following objects, <AF> may not work properly.
If this is the case, use <MF> instead.
- Very bright object, or dominant object in a dark scene
- Object against the rear side of a moist or dirty glass
- A scene where nearby and distant objects co-exist
- White wall or single-colored object
- Venetian blinds and other horizontally striped objects
● ZOOM SPEED
You can adjust the zoom operation speed.
The zoom speed is the fastest when the value is 4.
● DISPLAY ZOOM
You can set to display the zoom status on the screen.
It will disappear in about 3 seconds if the zoom factor has no further change.
● DIGITAL ZOOM
You can set the maximum allowable digital zoom ratio.
Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of
x39. If you set DIGITAL ZOOM to x12, you can take a shot at up to x468 (39x12).
When you set DISPLAY ZOOM as on, you may see zoom value on the screen.