Samsung SCC-ZM395N - Manual (Page 22)

Version 1.1
- 22 -
※ Setting one or more privacy zone and enabling privacy function will disable
the PIP function.
For better privacy protection, make your privacy zone bigger than the required,
bigger by about 30%.
Video portion of mosaic pattern or colored by the privacy zone setup is not recoverable.
4-2-4. PRESET SET
This function provides preset camera settings such as zoom
and focus so to enable quicker and easier accessing and
monitoring, which supports up to 212 presets.
Select <MAIN MENU>-<PRESET>.
Select the preset number.
Select <POSITION>.
Set <PRESET ID> to <ON> and enter the name.
For entering the name, refer to “CAMERA ID”.
4-2-5. OTHER SET
● FACTORY DEFAULTS
All the settings will be restored to the factory default.
However, the settings of PROTOCOL, BAUD RATE,
ADDRESS and LANGUAGE will not be restored to the
default.
● OSD COLOR : BW, R/G/B
You can set the OSD(On-screen Display) color to COLOR
or B/W.
4-2-6. COMMUNICATION
The COMMUNICATION menu is used to configure the settings
regarding UART communications. Use the connector of the
camera to connect to UART. Use the
▲▼◀▶ switch to
specify the protocol and baud rate for communications.
● PROTOCOL
SAMSUNG, PELCO-P/D, VICON, PANASONIC, PHILIPS,
ERNA, DIAMOND, VCLTP, KALATEL
● BAUD RATE : 2400, 4800, 9600, 19200, 38400
※The baud rate differs, depending on the specified protocol.
● ADDRESS : 0~255