Framed panels, Partial framed option – Sub-Zero 601RG User Manual
Page 17
Framed Panels
17
Partial Framed Option.
If you choose not to use
custom panels above and below the glasswell for
dispenser Model BI-42SD or BI-48SD, a stainless steel
insert panel is available as a sales accessory. This
accessory kit includes partial framed molding and classic
stainless steel panel to provide a spill-resistant finish
above and below the glasswell on the refrigerator door
only. The partial framed accessory kit (7004855) is
available through your Sub-Zero dealer. Refer to panel
dimensions for the partial framed option below.
IMPORTANT NOTE:
When using raised panels with the
partial framed kit, a
1
/
2
" (13) trim reveal down to
1
/
4
" (6)
thickness is necessary at the bezel for the panels to fit
properly.
Optional Partial Framed Panels
MODEL BI-42SD
W
H
Refrigerator Panel
15
1
/
16
"
(383)
69
9
/
16
"
(1767)
Freezer Panel
15
1
/
16
"
(383)
69
9
/
16
"
(1767)
MODEL BI-48SD
W
H
Refrigerator Panel
16
3
/
4
"
(425)
69
9
/
16
"
(1767)
Freezer Panel
16
3
/
4
"
(425)
69
9
/
16
"
(1767)
W
W
H
BI-42SD / BI-48SD
Partial Framed Option
Partial Framed Kit
subzerotrade.com
Framed