Dual installations, Flush inset panels—dual installation – Sub-Zero 601RG User Manual
Page 34
Dual Installations
34
Flush Inset Panels—Dual Installation.
When
installing two built-in models side by side in a flush inset
application, you must decrease the width of the decora-
tive flush inset panels by
1
/
2
". Adjustments to the panel
offsets will also need to be made. These adjustments are
needed to achieve a proper fit and to ensure the panels
do not collide when closing. Panel dimensions in the
chart below have been adjusted to reflect the decrease in
panel dimensions.
IMPORTANT NOTE:
If a filler strip is not used, dual instal-
lations can only be accomplished using two units with
opposite hinges.
Illustrations A–F provide panel offsets and reveals for all
built-in models in a flush inset application. Refer to the
chart below for reference to the illustrations relating to
your specific model. All reveals are
1
/
2
" (13) unless other-
wise specified.
For additional information on model specific panel
reveals, visit the Specification Library section of our
website, subzerotrade.com.
5
/
8
"
(16)
5
/
16
"
(8)
1
/
2
"
(13)
FLUSH INSET PANEL
SPACER
BACKER
DOOR / DRAWER / GRILLE
TOP VIEW
CABINETRY
Illus. A
Illus. B
DUAL
TRIM
1
/
4
"
(6)
REVEAL
5
/
16
"
(8)
1
/
8
"
(3)
DOOR
DOOR
TOP VIEW
Do not exceed the flush inset decorative panel
dimensions. Exceeding dimensions could cause
damage to the panels and the Sub-Zero unit.
1
/
2
"
(13)
5
/
16
"
(8)
1
/
8
"
(3)
CABINETRY
GRILLE
SIDE VIEW
Illus. C
Illus. D
1
/
2
"
(13)
3
/
32
"
(2)
5
/
16
"
(8)
5
/
16
"
(8)
5
/
32
"
(4)
GRILLE
DOOR
SIDE VIEW
5
/
8
"
(16)
5
/
32
"
(4)
5
/
16
"
(8)
5
/
16
"
(8)
3
/
32
"
(2)
DOOR
DRAWER
SIDE VIEW
Illus. E
Illus. F
5
/
16
"
(8)
3
/
32
"
(2)
DOOR /
DRAWER
SIDE VIEW
Panel Offsets
Illus.
ALL REFRIGERATOR / ALL FREEZER
Doors (hinge) / Grille Sides
A
Doors (handle) Sides
B
Grille Top
C
Grille Bottom / Door Top
D
Door Bottom
F
OVER-AND-UNDER
Doors (hinge) / Drawer / Grille Sides
A
Doors (handle) Sides
B
Grille Top
C
Grille Bottom / Door Top
D
Door Bottom / Drawer Top
E
Drawer Bottom
F
Dual
Installations