Sharp MX-M850 - Manual (Page 121)

25
Changing the resolution
The resolution for scanning the original can be set separately for the automatic document feeder and the document glass.
How to select the resolution
For normal text originals, 600X300dpi produces an image that is sufficiently legible. To bring out the detail in a photo or
illustration image, or to clarify fine text, set the resolution to high resolution (600X600 dpi).
2
Adjust the exposure level.
Touch the key to make the copy darker.
Touch the key to make the copy lighter.
3
Touch the [OK] key.
1
Touch the [Scan Resolution] key and display the resolution settings screen.
2
Select the resolution.
(1) Touch the key of the desired resolution for
the automatic document feeder and for the
document glass.
(2) Touch the [OK] key.
Return to the screen of step 1 on page 24.
1 5 3
Exposure OK
Manual
Text/
Prtd.Photo
Scan
Resolution
Photo
Text/Photo
Map
Text
Printed
Photo
Light
Original
Auto
Original Image Type
1 5 3
Exposure
Manual
Text/
Prtd.Photo
Photo
Text/Photo
Map
Text
Printed
Photo
Light
Original
Auto
Original Image Type
OK
Scan
Resolution
Scan Resolution OK
600X400dpi
600X600dpi
600X300dpi 600X300dpi
600X400dpi
600X600dpi
Document Feeder
This setting is applied when copy ratio is set to 100%.
Document Glass
(2) (1)
If [Auto] is selected but the darkness or lightness of the image does not seem quite right...
If the image seems too light or too dark when [Auto] is selected, the exposure level can be adjusted using "Copy Exposure
Adjustment" in the system settings (administrator).
• System Settings (Administrator): Exposure Type
This is used to change the default original image type.
• System Settings (Administrator): Copy Exposure Adjustment
The exposure level used for automatic exposure adjustment can be adjusted.
• System Settings (Administrator): 600dpiX600dpi Scanning Mode for Document Feeder/Quick Scan from
Document Glass
The default resolution setting can be changed.