Sharp MX-M850 - Manual (Page 123)

27
MANUALLY SELECTING THE RATIO (Preset
ratios/Zoom)
Touch the [Copy Ratio] key in the base screen of copy mode to select one of four preset enlargement ratios or four
preset reduction ratios (maximum 400%, minimum 25%).
In addition, the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.
1
Set the ratio.
Touch a preset ratio key and/or the zoom keys to set the ratio.
There are two setting screens. Use the
keys to switch
between the screens.
● 1st screen
• Enlargement keys (2 ratios): 121% and 129%
• Reduction keys (2 ratios): 64% and 77%
• [100%] key
● 2nd screen
• Enlargement keys (2 to 4 ratios)
200%, 400%, any ratio (max. of two)
• Reduction keys (2 to 4 ratios)
25%, 50%, any ratio (max. of two)
• [100%] key
• (A) keys
The keys marked (A) can be set to show any ratio using "Add or Change Extra Preset Ratios" in the system settings
(administrator).
• To quickly select a ratio, touch a reduction or enlargement key to select a ratio close to the desired ratio and then
use the zoom keys for fine adjustment.
• The zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.
Touch the key to increase the ratio, or the key to decrease the ratio. (If you continue to touch the /
key, the ratio will change automatically. After 3 seconds, the ratio will change rapidly.)
• If the message "Image is larger than the copy paper." appears when an enlargement ratio is selected, the image
may not fit on the paper.
Copy Ratio OK
Auto Image XY Zoom
121%
129%
64%
77%
100%
%
Zoom
100
11x17
11x17
8½x11
8½x14 8½x11
8½x14
8½x11
5½x8½
8½x11
8½x14
5½x8½ 8½x11
11x17
11x17
1
2
Copy Ratio
200%
400%
300%
25%
50%
75%
350% 150%
100%
%
100
OK
Auto Image XY Zoom
Zoom
2
2
(A)