Display the original settings screen, Press the [start] key ( ), 1) make sure that fax mode is selected – Sharp MX-M850 User Manual

Page 375: 2) touch the [original] key, 1) touch the appropriate orientation key, 2) touch the [ok] key

Advertising
background image

55

3

Display the original settings screen.

(1) Make sure that fax mode is selected.

If fax mode is not selected, touch the [Fax] tab.

(2) Touch the [Original] key.

The current settings for [Original], [Exposure], and [Resolution], are indicated at the right of each key. To change a
setting, touch the appropriate key.

AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original)

(page 69),

SPECIFYING THE

ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce)

(page 70),

CHANGING THE EXPOSURE AND

EXPOSURE MODE (ORIGINAL IMAGE TYPE)

(page 76),

CHANGING THE RESOLUTION

(page 78),

4.

SPECIAL MODES

(page 87)

4

Specify the orientation in which the
original is placed.

When specifying the orientation of the image to be transmitted,
specify the orientation of the original placed in step 1.

(1) Touch the appropriate orientation key.

If the top edge of the original is up, touch the

key. If

the top edge of the original is to the left, touch the

key.

(2) Touch the [OK] key.

You will return to the screen of step 3.

The original orientation is initially set to

. If the original was placed with the top edge up, this step is not

necessary.

5

Press the [START] key (

).

Scanning begins.

• If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one

page, go to step 7. To scan more pages, go to the next step.

• If the original was inserted in the document feeder tray, a beep will sound when scanning is completed.

If "Fax Dest. Confirmation Mode" is enabled in the system settings (administrator), a destination confirmation message
will appear. See "

FAX DESTINATION CONFIRMATION MODE

" (page 61).

6

If the original was placed on the document glass, replace it with the next original
and press the [START] key (

).

Repeat until all originals have been scanned.

Auto

Auto

Auto

Fax

Internet Fax

Scan:

Scan

Send:

Standard

Auto Reception

Fax Memory:100%

8½x11

File

Quick File

Address Review

Direct TX

Sub Address

Address Book

Special Modes

Resolution

Exposure

Original

USB Mem. Scan

Data Entry

(1)

(2)

Fax/Original

OK

Auto

Auto 8½x11

Scan Size

2-Sided
Tablet

2-Sided
Booklet

Send Size

100%

Image Orientation

(2)

(1)

Advertising
This manual is related to the following products: