Sharp MX-M850 - Manual (Page 647)

77
‹ Speaker Volume Details Setting
78
• Speaker / Line Monitor Small: 3, Middle: 6, Big: 8
• Ringer Volume / Fax Receive Complete Signal / Fax Send
Complete Signal / Fax Communication Error Signal
Small: 2, Middle: 4, Big: 8
‹ Remote Reception Number Setting 5 78
‹ Original Print on Transaction Report Print Out Error Report Only 79
‹ Transaction Report Print Select Setting
79
• Single Sending Print Out Error Report Only
• Broadcasting Print Out All Report
• Receiving No Printed Report
• Confidential Reception Print Out Notice Page
‹ Activity Report Print Select Setting
79 • Auto Print at Memory Full Disabled
• Print Daily at Designated Time Disabled
‹ ECM Enabled 79
‹ Distinctive Ring Detection Off 79
X Fax Send Settings 80
‹ Auto Reduction Sending Setting Enabled 80
‹ Rotation Sending Setting All Enabled 80
‹ Quick On Line Sending Enabled 80
‹ Printing Page Number at Receiver Enabled 80
‹ Date/Own Number Print Position Setting Outside the Original Image 80
‹ Recall in Case of Line Busy Times: 2, Interval: 3 min. 80
‹ Recall in Case of Communication Error Times: 1, Interval: 3 min. 80
X Registration of Own Name Select – 81
X Fax Receive Settings 81
‹ Number of Calls in Auto Reception 2 81
‹ Duplex Reception Setting Disabled 81
‹ Auto Receive Reduce Setting Enabled 81
‹ Print Style Setting Auto Size Select 82
‹ Set the Telephone Number for Data Forwarding – 82
‹ A3 RX Reduce Disabled 82
‹ Fax Output Settings Varies depending on the machine
configuration
82
X Anti Junk Fax Setting Disabled 83
X Fax Polling Security Enabled 83
Item Factory default setting Page