Sharp MX-M850 - Manual (Page 111)

15
This chapter explains the basic procedures for making copies, including selection of the copy ratio and other copy
settings.
MAKING COPIES
USING THE AUTOMATIC DOCUMENT FEEDER TO
MAKE COPIES
This section explains how to make copies (1-sided copies of 1-sided originals) using the automatic document feeder.
2
BASIC PROCEDURE FOR
MAKING COPIES
1
Place the originals face up in the
document feeder tray with the edges
aligned evenly.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
2
Check the paper to be used.
Make sure that the desired paper (tray) is selected.
To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS (page 14)
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
Indicator
line
Special Modes
Plain
2-Sided Copy
Output
File
Quick File
Copy Ratio
1. 2.
7.
8½x11 8½x11
Original Paper Select
Auto
8½x11
Plain
Auto
8½x11
Exposure
Auto
8½x14 4.
11x17
11x17
6.
11x17
5.
11x17
3.
8½x11
100%
Plain
Plain