Sharp MX-M850 - Manual (Page 492)

172
This chapter explains the system settings for the image send function that can be configured by general users.
For information on configuring the system settings, see the User's Guide. For system settings that require administrator
rights, see the Administrator's Guide.
ACCESSING THE SYSTEM SETTINGS
Make sure that the machine is in the standby state and then press the [SYSTEM SETTINGS] key on the operation
panel.
When the [SYSTEM SETTINGS] key is pressed, the following menu screen appears on the touch panel.
Touch the item in this screen that you wish to configure. For the procedure for configuring each setting, see the
explanation of the setting. The following settings are explained:
• ADDRESS CONTROL (page 174)
• FAX DATA RECEIVE/FORWARD (page 181)
9
SYSTEM SETTINGS
System Settings Admin Password Exit
Total Count
Paper Tray
Settings
Printer Condition
Settings
Document Filing
Control
Address Control
Fax Data
Receive/Forward
USB-Device Check
Default Settings
List Print
(User)
• To quit the system settings, touch the [Exit] key in the top right corner of the screen.
• For the procedure to follow when user authentication is enabled, see "USER AUTHENTICATION" in the User's Guide.
• Web pages
The system settings can also be configured from the Web pages. To configure the system settings from the Web pages,
click [System Settings] in the Web page menu.