Sharp MX-M850 - Manual (Page 57)

57
This chapter introduces the peripheral devices that can be used with the machine, explains the names of the output
devices such as the finisher and saddle stitch finisher, and explains manual finishing, which can be used when an
inserter is installed.
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard
equipment.
(As of April, 2007)
4
PERIPHERAL DEVICES
Product name Product number Description
Large capacity tray
MX-LCX6
Additional tray. A maximum of 3500 sheets of paper can be
loaded in the tray. Requires the multi bypass tray (MX-MFX1).
MX-LCX3N
Additional tray. Supports wide sizes such as 12" x 18" (A3W). Up
to 3000 sheets can be loaded.
The special bypass tray (MX-MFX1) for the MX-M850 is
required.
Large capacity trays
MX-LCX4
Additional tray.
A combined total of 4550 sheets of paper can be loaded in the
three trays.
MX-LCX5
Additional tray. Supports wide sizes such as 12" x 18" (A3W).
A combined total of 4000 sheets of paper can be loaded in the
three trays.
Multi bypass tray
MX-MFX1
Additional tray. A maximum of 100 sheets of paper can be
loaded in the tray. Requires large capacity trays.
MX-MFX2
Additional tray. A maximum of 500 sheets of paper can be
loaded in the tray.
Finisher
MX-FNX5
Output device that enables the use of the staple function and
offset function.
Up to 100 sheets of paper can be stapled.
MX-FNX6
Output device that enables the use of the staple function and
offset function.
On the special finisher for the MX-M850, up to 50 sheets of
paper can be loaded.
Saddle stitch finisher MX-FNX7
Output device that enables use of the staple function, offset
function and saddle stitch function.
Only for the MX-M850.
Saddle unit MX-FNX8
Output device that enables the saddle stitch function. Requires
the finisher (MX-FNX5).