Select Products II - Manual (Page 4)

4
Introduction
The Coloram II System consists of scrolling color changers, mixing color changers,
dowsers, other products and power supplies in a wide range of models offering ease of
setup and use. Its color changing capability and DMX compatibility affords the designer
wide capability and versatility. The lightweight color changers slide easily into the gel
frame holder of the light fixture. The compact power supplies attach easily to the truss of
the lighting rig or mount into a 19-inch rack.
The Coloram II System
The Coloram II System consists of one or more Color Changers or other components
and a remote power supply. The DMX512 control signal from the lighting board is
connected to the power supply and can continue on to more Coloram II Power Supplies
or other DMX-controlled devices. The power supply sends both power and control
signal on a single cable eliminating the need for a separate power cable for each color
changer.
The Coloram II System also allows you to control the color changer fan speed via one
or multiple DMX channels on the lighting console.
The Coloram II System is equipped with the Intelligent Diagnostic System (IDS). Status
information is sent from each of the Coloram II Color Changers to the Coloram II Power
Supply.
Caution: The Coloram II System is not compatible with the Forerunner
System. Do not connect Coloram II Color Changers to Forerunner Power
Supplies, or Forerunner Color Changers to Coloram II Power Supplies.
Damage from such action will not be covered by the Coloram II or
Forerunner warranties.