Sharp Notevision PG-C355W - Manual (Page 36)

-34
Image Projection
COMPUTER 1,
COMPUTER 2,
DVI, S-VIDEO,
VIDEO buttons
VOL +/–
(Volume)
buttons
AV MUTE
buttons
Switching the Input Mode
Select the appropriate input mode for the con-
nected equipment.
Press COMPUTER1/2, DVI, S-VIDEO
or VIDEO on the remote control to se-
lect the input mode.
• When you press INPUT on the projector or DVI
on the remote control, the INPUT list appears.
Press '
' ' ' '/" " " " " to switch the INPUT mode.
Adjusting the Volume
Press VOL +/– on the remote control or –\/
|+ on the projector to adjust the volume.
Note
• Pressing VOL–/–\ \ \ \ \ will lower the volume.
• Pressing VOL+/|
| | | |+ will raise the volume.
• When the projector is connected to exter-
nal equipment, the volume level of the ex-
ternal equipment changes in accordance
with the volume level of the projector. Set
the projector’s volume to the lowest level
when turning the projector on/off or when
changing the input signal.
• When you do not want to output the sound
from the projector’s speaker while the pro-
jector is connected to external equipment,
set “Speaker” in “PRJ-ADJ” menu to “Off”.
(See page
51 .)
Displaying the Black
Screen and Turning off
the Sound Temporarily
Press AV MUTE on the remote control to
temporarily display a black screen and turn
off the sound.
Note
• Pressing AV MUTE again will turn the pro-
jected image back on.
On-screen display
On-screen display