Sharp Notevision PG-C355W - Manual (Page 53)

-51
Useful Features
Auto Power Off
Auto Restart
System Sound
Speaker
Audio Out
9600bps
Enable
On
On
On
FAO
On
Enable
Normal
Disable
SEL./ADJ.
RETURN ENTER
END
Monitor Out
LAN/RS232C
RS-232C
Fan Mode
System Lock
All reset
Lamp Timer (Life) [ 0]h [ 0] min ( 100%)
Pict. SIG SCR PRJ-ADJ Net.
1
2
3
4
5
6
7
8
9
0
q
w
Menu operation Page 43
Description
The projector automatically enters the
standby mode when no input signal is
detected for 15 minutes or longer.
The Auto Power Off function will be
disabled.
Selectable items
On
Off
1 1 1 1 1 Auto Power Off Function
Note
• When the Auto Power Off function is set to “On”,
5 minutes before the projector enters the
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
Description
If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
The projector does not turn on auto-
matically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.
Selectable items
On
Off
2 2 2 2 2
Auto Restart Function
Description
A confirmation sound is made when the
projector turns on/off.
No confirmation sound is made.
Selectable items
On
Off
3 3 3 3 3 Setting the Confirmation
Sound (System Sound)
Helpful Functions Set during Installation (“PRJ-ADJ” menu)
4 4 4 4 4 Speaker Setting
This function allows you to set the audio output
of the internal speaker to “On” or “Off” such as
when the projector is connected to an external
amplifier.
Selectable items
On
Off
Description
The audio signal is output from the internal
speaker.
The audio signal is not output from the
internal speaker.
5 5 5 5 5 Audio Output Type Setting
This function determines whether the audio level
output from the AUDIO output (MONITOR output)
terminal is fixed or variable by linking with VOL-
UME.
Info
• When “Audio Out” has been set to “VAO”, first make
sure to lower the volume of the projector before
turning the power on or off and when switching the
input.
Description
Audio output that does not vary in
strength with the volume level of the
source projector.
Audio output that varies in strength with
the volume level of the source projector.
Selectable items
FAO
(Fixed Audio
Output)
VAO
(Variable
Audio Output)
6 6 6 6 6 Monitor Output
7
7 7 7 7 LAN/RS232C
When set to “Enable”, the function is activated
and power is consumed even in the standby mode.
It is recommended that the function be set to “Dis-
able” when it is not connected. This reduces power
consumption when the projector is in the standby
mode.
Description
The function is activated even if the
projector is in standby mode.
The function is switched off when the
projector is in standby mode.
Selectable items
Enable
Disable
Note
• When you want to control the projector using
the LAN/RS232C function, select “Enable”.