Samsung iDCS500 - Manual (Page 20)

Samsung iDCS500 SLT User Guide
–14–
DIALLING FEATURES
SPEED DIALLING
You can dial a pre-programmed telephone number stored in the system-wide speed
dial list of numbers (500–599) or from your personal list of numbers (00–49).
1. Lift the handset and dial 16.
2. Dial the 2-digit personal speed dial number, or the 3-digit system speed dial
number.
The telephone number is automatically dialled for you.
PROGRAMMING PERSONAL SPEED DIAL
NUMBERS
You can program frequently dialled telephone numbers into a personal speed dial
list. Your station may be allocated up to fifty speed dials, 00–49. Ask your system
administrator how many are allocated to you. To assign phone numbers to your
speed dials:
1. Lift the handset, dial 15 and then dial 105.
2. Dial a speed dial number (00–49).
3. Dial a line or line group access code (usually 9).
4. Dial the telephone number to be stored (24 digits maximum). This can in-
clude V and #.
5. Replace the handset to store the number.
Note:
§ If you hear an error tone at any time, replace the handset and start from the begin-
ning.
§ You cannot put a Recall or a Pause into the phone number.
§ There is no way to erase a programmed number, except by overwriting it with an-
other number.
§ You can enter your speed dial numbers in the table printed at the back of this guide
for easy reference.